Omschrijving

The Green-GO InterfaceX links 2-wire or 4-wire analog intercom systems into the Green-GO digital Ethernet network. This audio in/out interface with contact closures connects to an existing matrix or other analog interfacing products. A 4-wire intercom can be connected to the dual in/out 3-pin XLR ports. This allows two separate audio signals (or a stereo signal) to be injected into the Green-GO network and transmitted to any other location on the same Ethernet network. Next to the 4-wire connections, there is a separate 3-pin XLR port dedicated to connecting a basic analog 2-wire intercom (partyline system). All of the ports can be configured individually through the setup menu of the Green-GO InterfaceX. There are also two GPIO connectors provided on the back of the device.

The InterfaceX links 2-wire or 4-wire analogue intercom systems intothe Green-GO digital Ethernet network. This audio in/out interfacewith contact closures connects to an existing matrix or other analogueinterfacing products. A 4-wire intercom can be connected to thedual in/out 3-pin XLR ports. This allows two separate audio signals(or a stereo signal) to be injected into the Green-GO network andtransmitted to any other location on the same Ethernet network.Next to the 4-wire connections, there is a separate 3-pin XLR portdedicated to connecting a basic analogue 2-wire intercom (partylinesystem). All of the ports can be configured individually through thesetup menu of the Green-GO InterfaceX. There are also two GPIOconnectors provided on the back of the device.

The INTX Audio Interface X is a dual port 4-Wire and single port 2-Wire device, used for integrating not only line level audio signals, in and out of the system but additionally a channel of 2-wire. Featuring a full-color TFT or LCD display that shows information about channels, cue signals; configurable by a multifunction encoder, with access to many of the same functions and features as most other Green-GO devices.

Connectivity to 4-wire systems is achieved via 2x XLR3F and 2x XLR3M with Connectivity to 2-wire systems is achieved via a single XLR4F. Powered via PoE through the network cable connected to the devices Ethercon port or 12V DC connector (power supply not included).

The term 4-wire refers to two pairs of (balanced) wires, providing independent, bidirectional audio lines. They can act as a general-purpose line in/out device suitable for show relay and announcements or for linking to an external intercom channel.

The audio line setup is not an automated process. After the 2-wire system is established, an auto null should be undertaken to balance the audio between the two systems. Typically presenting as a single group, this connection also benefits from additional Green-GO features such as program audio and announce functions.