Omschrijving

The Green-GO BridgeX is a quad network bridge interface, intended to connect remote locations to a Green-GO network. This can be done in two separate modes; ‘Bridge’ mode or ‘Remote User’ mode. In both modes, the Green-GO BridgeX can support four connections.
In ‘Bridge’ mode, the BridgeX will connect two Green-GO networks together through a separate network or the internet. The audio (and optionally call) signals will be transported from one Green-GO network to the other. This setup will create one group that is spread over two sites. The group ID and name of these two sites do not need to match.
The BridgeX can also be configured to enable remote users. A Green-GO device in a remote location can connect to a LAN port of the BridgeX through the internet – when set to Remote Connection mode – and simply becomes another user in the system.

There is also an iOS app available which transforms your iOS device into a beltpack. Instead of connecting to a remote Green-GO network, you can also connect to the iOS device.

The Green-GO BridgeX provides (4) UDP network ports, intended toconnect remote locations to a Green-GO network. This can be done intwo separate modes; ‘Bridge’ mode or ‘Remote User’ mode. In bothmodes, the Green-GO BridgeX can support four connections.In ‘Bridge’ mode, the BridgeX will connect two Green-GO networkstogether through a separate network or the internet. The audio(and optionally call) signals will be transported from one Green-GOnetwork to the other. This setup will create one group that is spreadover two sites. The group ID and name of these two sites do not needto match.The BridgeX can also be configured to enable remote users. AGreen-GO device in a remote location can connect to a LAN port ofthe BridgeX through the internet – when set to Remote Connectionmode – and simply becomes another user in the system. In addition, aport can be used to connect an iOS device through a wireless accesspoint connected to the bridge to provide an auxiliary wireless user.Each of the four UDP ports on the bridge can be configured for any ofthe three options - remote group, remote user, or wireless iOS user.

The BridgeX Network Interface X is a quad port Network device, Used for linking local Green-GO networks to wider access networks such as the World Wide Web, enabling Green-GO systems to communicate across the globe. Featuring a full-color TFT or LCD display that shows information about channels, cue signals; configurable by a multifunction encoder, with access to many of the same functions and features as most other Green-GO devices.

Connectivity to external networks is achieved via a dual 10/100 Mbps “external network” port. Powered via PoE through the network cable connected to the devices Ethercon port or 12V DC connector (power supply not included).

Each Bridge X interface consists of 4 ports which can either be used in “remote connection” or “group bridge” modes. - Remote User mode: enables a single external device to become a full member of the host system. - Group Bridge mode: requires a Bridge interface X at each local network, linking one group from each site intendant of configurations.

Technical Data
— Dimensions: 485 x 150 x 45 mm
— Weight: 1.4 kg
— Connections: 4 x 10/100Mbps Neutrik RJ45 EtherCON, Controls: 1 x Matrix-Dot-Display, 1 x Rotary Encoder
— Power Supply: PoE (802.3af) or optional external 12V DC Power Supply