Omschrijving

The Green-GO BPX Beltpack X provides direct access to up to 32 high quality, low latency channels via a full-color OLED display; indicating the name, volume level, and status of a channel. With 4 associated push-buttons controlling each channel's screen features; Talk, Listen or Call depending on which function is selected. Two rotary multifunction encoders are located symmetrically on either side of the belt pack, making it suitable for left- and right-handed users. The device's buttons and display functions can be configured and provide direct access to up to four channels, with further channels accessible within an extended menu.

Audio is presented through a XLR4M HEADSET connector (handset not included). Powered exclusively via PoE through a network cable connected to the devices Ethercon port.

Sharing most features with its WBPX Beltpack X siblings, making the switch between wired and wireless devices easy. If you need bigger buttons and a little bit more weather protection, check out the sports version; available as wired and wireless versions.

The BPX Beltpack is a lightweight and durable companion Ethernetnetwork based digital intercom system, providing comfortable anddirect access to up to 4 direct Channels. The 4 buttons can be usedeither all be used as talk buttons, or as a combination of talk and callbuttons (in the combination 2/2 or 3/1). A simple press of the buttonwill toggle (latch), while a long press will temporarily activate thevoice connection (PTT). A simple key combination enables the userto enter the extended Channel mode, where there‘s access to all32 available channels.A high-contrast OLED display can provide text messages, light and callsigns, as well as status messages clearly in any environment. Incomingcall signals are indicated by a red/white flashing display, while alarmsignals can additionally activate an alarm tone if desired. Two multipurpose encoders on the sides of the unit complete the hardwarefeatures, providing multiple functions including volume control. Allsettings can be made either on the device itself via the integrateddisplay or via the free Green-GO Control Software.

The Green-GO Beltpack X is part of the Green-GO communications system, an Ethernet network based digital intercom system. The Beltpack X can make use of 32 available channels, a program audio channel and an extra channel for direct user communication. This means that users can talk to multiple groups or directly (and privately) to other users.
The advantage of the Green-GO communications system is that there is no single point of failure because there is no central unit that carries the entire system. A central matrix or routing engine is not required – you can very easily scale up your Green-GO network by simply adding more devices to it. Audio can easily be injected into the system and distributed to a group. The audio can be picked up by any device in the network that is interested in it.

The Green-GO Beltpack X features a high-resolution full colour OLED display which shows information about channels, cue signals and the different functions that are operated by the four buttons on the front of the Beltpack. These buttons can be configured to provide instant access to up to four channels. Two rotary encoders are located on either side of the Beltpack X, making it suitable for both left- and right-handed users. By pushing the encoders, the Beltpack X can answer the most recent audio source. The encoders can also be programmed to control various other functions, e.g. one encoder can be set up for level control while the other encoder controls channel selection. All matrix data is held within the device.
The Beltpack X is powered through a Power over Ethernet connector located on the back. Also located on the back is a 4-pin XLR headset connector.